New in packaging kit Includes A2 Flash Hider and a Crush washer.

1/2 x 28 Thread

Manganese phosphate finish

Mfg. Part No.: G2-K031-A000-OP

UPC: 712038921515

Brand new in the wrapper Magpul PMAG 30 AR/M4 Gen M3 Coyote Tan AR-15 Magazine MAG557-MCT>

For 5.56x45 NATO / .223 Remington

30 round capacity

Impact/dust cover, paint pen dot matrix, and slimline floorplate

Color: Medium Coyote Tan (similar to Flat Dark Earth)

Email for QUANTITY DISCOUNT

From Magpul: The flagship of our reliable magazine line. The next-generation PMAG 30 AR/M4 GEN M3 is a 30-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO / .223 Remington. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability that exceed rigorous military performance specifications.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons, such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.

Similar to the MOE® PMAG, the GEN M3 features a long-life USGI-spec stainless steel spring for commonality, a four-way anti-tilt follower, constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning.

The PMAG 30 GEN M3 also includes a redesigned bolt catch notch in the rear of the magazine that provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new, aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.

Made in the U.S.A.

Part No.: MAG557-MCT

UPC 840815117162

A layaway plan is also available. Please email us at [email protected] for details

Fully compatible with any brand mil spec upper AR-15 receiver, not just Anderson

UPC: 784672106818

SKU: BK-K027-AB00
Part No. 6061

Brand new Magpul MOE AR-15 Grip Black SKU D2-J072-B000

The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip.

The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments.

The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.

Made in U.S.A.

Features

Replacement for AR15/M4 pistol-grip*
One-piece reinforced polymer construction
Beavertail backstrap for enhanced ergonomics
Positive anti-slip texture
Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

Specifications

MOE Grip
Weight, w/hardware: 2.8 oz.
Height, receiver to bottom: 4.0 in.
Thickness, max: 1.2 in.

*NOTE: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function.

5-Round magazine for the American Tactical Omni Hybrid 410 Shotgun

100% Made in the USA and Assembled in Summerville, SC. ATI’s patented 5 & 15 round magazines are the ONLY magazine for the American Tactical Omni Hybrid 410 AR Shotgun.

Mfg. Part No.: ATIM410GA5

UPC 813393019036

Brand new Magpul MOE AR-15 Grip Flat Dark Earth FDE -- MAG415-FDE

The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip.

The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments.

The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.

Made in U.S.A.

Features

Replacement for AR15/M4 pistol-grip*
One-piece reinforced polymer construction
Beavertail backstrap for enhanced ergonomics
Positive anti-slip texture
Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

Specifications

MOE Grip
Weight, w/hardware: 2.8 oz.
Height, receiver to bottom: 4.0 in.
Thickness, max: 1.2 in.

*NOTE: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function.

Gen-M3

SR25/M110 compatibility

7.62x51 NATO / .308 Winchester

Impact Dust Cover, Marking Matrix, Slimline Floorplate, Over-Travel Insertion Stop

UPC 873750008509

The 7.62x51 NATO (.308 Winchester) PMAG 20 LR/SR GEN M3 is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles featuring true 20-round capacity, constant-curve body, anti-tilt follower, and snap on Impact/Dust Cover.

Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.

Made in U.S.A.

FEATURES

• Optimized for use with SAAMI-spec 7.62x51/.308 Winchester ammunition
• Commercial rifle compatibility includes the Armalite AR-10A, Colt LE901-16S, CORE Rifle Systems CORE30, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, Noveske Gen III N6, POF P-308, Ruger SR-762, Ruger Precision Rifle, S&W M&P10, SIG716, and others*
• Next-generation impact and crush resistant polymer construction
• Constant-curve internal geometry for smooth feeding
• Anti-tilt, self-lubricating follower for increased reliability
• High-quality stainless steel spring for corrosion resistance
• Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
• Paint pen dot matrix panels on the bottom of the body to allow for identification marking
• Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many pouches
• Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage during storage and transit

• *NOTE: Compatible with older model Bushmaster .308 ORC, Remington R-25, and DPMS LR308 rifles, but not optimized for bolt lock functionality with newer models based on the DPMS GII design. NOT compatible with Armalite AR-10B, Springfield Armory M1A, Rock River Arms LAR8, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91/G3 patterned magazines. To accommodate longer than SAAMI-spec match ammunition, this magazine may not drop free from all makes of lower receivers.

With a similar shape to a 'medium' sized MIAD, this AR15/M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.

FEATURES

Replacement for AR15/M4 pistol-grip*.

One-piece reinforced polymer construction with wrap-around rubber overmolding.

Beavertail backstrap for enhanced ergonomics.

Hard-polymer bottom edge to reduce equipment snags or grip damage.

Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage.

We ship to California for California legal items!