New in box EAA AKKAR Churchill 12 gauge Tactical Pump Shotgun 6+1 -- 1111380

The Churchill 612 Tactical pump action shotgun is purpose-built for home defense or as a police patrol shotgun.

It is outfitted with a pistol grip and Picatinny receiver for optics or lights, extended tactical choke tube, and ghost ring sight.

The 18.50" shorter barreled shotgun is perfect for tight maneuvering.

The polymer stock and grip are super durable no matter the conditions.

Ghost ring rear sight

Front red fiber optic front sight

Breach Brake

3” chamber

Part No: 111380

UPC 741566904684

A layaway plan is also available. Please email us at [email protected] for details

Brand New in the Factory Box American Tactical ATI Milsport Ltd AR-15 Optics Ready Rifle

In stock and ready to ship right away!

Forged aluminum lower receiver (not polymer) Flattop Optics Ready Carbine

Includes one 30 round polymer magazine with orange follower

Adjustable 6 position stock

M4 profile 16" barrel with 1:8 twist and Railed Gas Block

Model ATIG15MS556LTD

SOLD OUT -- EMAIL [email protected] FOR DETAILS ON OUR WAIT LIST

Brand new in the box Anderson Manufacturing AM-15 Rifle
Comes with 1 30 round aluminum magazine

Anderson Manufacturing in Hebron, Kentucky, manufactures all their parts, so they are able to offer Affordable, American Made, Quality for Less! The EXT Carbine Rifle is a high quality rifle for a low cost. Just add an optic of your choice and you are ready to take on range day!

This Rifle is assembled with the highest quality Anderson Manufacturing machined parts. Built by Anderson Manufacturing Armorers with the following parts: AM-15 Stripped Lower Receiver; Magpul Lower Parts Kit - Stainless Steel; AM-15 Buttstock - Magpul MOE; AM-15 Buffer Tube, 6 Position - Carbine Length; AM-15 Buffer Tube Castle Nut; AM-15 Buffer, Carbine Length; AM-15 Buffer Spring - Carbine Length; AM-15 Receiver End Plate - Ambi; .223 16" Barrel - Carbine Length; AM-15 Stripped Upper Receiver; AM-15 Bold Carrier Group, 5.56; AM-15 Charging Handle - Standard; AM-15 Gas Block, Low Profile - .750; AM-15 Gas Tube - Carbine Length; Flash Hider, Knight Stalker - 5.56/.223; AM-15 Upper Parts Kit; AM-15 Free Float Kit, EXT - 9".

The EXT Carbine Length Free Float Kit provides ultimate strength and durability while also providing comfort and functionality. The Length of this free float is 9.4" Featuring continuous top picatinny rail and bottom and sides designed to accept picatinny rails. Also featuring integral sling swivel attachment points. Made from 6061-T6 Aluminum, and finished to Mil Spec with type III Hard Coat Anodizing. Steel barrel nut (1¼"-18 thread), 3 allen head bolts, and two quick disconnects for forearm.

The AM-15 Lower Receiver is American made with superior quality for less! CNC machined from a high-strength, 7075 T6 aluminum forging for reliable performance and outstanding durability. Machined to Military Specifications & Standards and marked "Multi-Cal " to be used with multiple calibers on the AR-15 platform. This Lower Receiver comes in type III black hard anodize, and an Open Trigger.

The Magpul Lower Parts Kit for AM-15 includes the following: Bolt Catch (1), Bolt Catch Plunger (1), Bolt Catch Roll Pin (1), Bolt Catch Spring (1), Buffer Retainer (1), Buffer Retainer Spring (1), Magazine Catch (1), Magazine Catch Button (1), Magazine Catch Spring (1), Pivot Pin (1), Pivot/Takedown Pin Detent (2), Pivot/Takedown Pin Detent Spring (2), Safety Selector (1), Safety Selector Detent (1), Safety Selector Detent Spring (1), Takedown Pin (1), Trigger Guard (1), Trigger Guard Roll Pin (1), Magpul MOE Pistol Grip (1), Pistol Grip Lock Washer (1), Pistol Grip Screw (1), Stainless Steel Trigger (1), Stainless Steel Hammer (1), Trigger/Hammer Pins (2)Disconnect (1), Disconnect Spring (1), Trigger Spring (1), Hammer Spring (1).

The MOE Stock - Mil-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

The 6 Position Buffer Tube is Finished in Black Anodize, and made from 7075 T6 Aluminum. The buffer tube castle nut is the standard AR-15 buffer tube nut. The Carbine Length, Standard Buffer & Music Wire Type Buffer Spring. The Am-15 Mil Spec, Ambidextrous Receiver End Plate has two Sling Holes and comes with a Parkerized Finish.

The Upper Receiver is machined from 7075 T6 Aluminum forging. Featuring M4 feed ramps, this upper receiver is machined to Military Specifications & Standards and can be used with multiple calibers on the AR-15 platform. This upper receiver comes in type III hard coat black anodize.

The 16" 5.56 M4 barrel is made from 4150 Chrome Moly Vanadium Steel with a Parkerized finish. Featuring a carbine length gas system with a .750" gas port and a 1:8 twist, this barrel provides top accuracy and precision for your rifle.

The Knight Stalker Flash Hider reduces barrel rise for fast accurate follow up shots, and significantly cuts flash down for fast target acquisition.

The AM-15 Bolt Carrier Group - .223 Complete Bolt and Carrier Group is Phosphate coated and Chrome Lined. The Carrier is made from 8620 steel, and the Bolt is made from 9310 steel and Phosphate coated, MPI Tested. The 223 Bolt and Bolt Carrier Assembly comes complete with Cam Pin, Firing Pin and Firing Pin Retainer.

The AM-15 Charging handle is the standard AR-15 charging handle.

The AM-15 Low Profile Gas Block Assembly is intended to fit underneath free floats. This Gas Block is made from 6061 T6 aluminum and is compatible with a .750 dia Barrel. The gas block is paired with an AM-15 Carbine Length Gas Tube with a length of 9.75", and is made from 304 Stainless Steel.

Item No. B2-K855-A001

UPC 784672476881

A lay away plan is also available. Please email us at [email protected] for details

Anderson Manufacturing Optic Ready AR-15 with RF85 Treatment – Model B2-K850-A000-R

Per Anderson: Utilizing visionary RF85 nano-technology, the Anderson Rifle is the first—and only—rifle in the world that requires zero lubrication. Which means it never, ever needs oil. Cleans easily with just soap and water. This could very well be the only rifle you need.

This AM-15 runs cleaner, faster and longer. Its proprietary RF85 process permanently injects calcium into the molecular fabric of the metal— reducing friction by an astounding 85% while forming a lasting protective barrier that eliminates the need for any lubrication.

This AM-15's core is an Anderson Lower and Upper Receiver, both threated with proprietary RF-85, CNC machined from 7075 T6 aluminum and type III hard anodized. This rifle comes standard with an Anderson Lower Parts Kit (RF-85 treated) featuring the Anderson Stainless Steel Fire Control Group for a nice crisp trigger and 23% faster action.

Comes equipped with RF-85 treated AM-15 Bolt Carrier Group and Charging Handle that supports the 23% faster action while running on the 85% reduced friction amongst the receiver and itself.

The Anderson RF-85 Treated Lower and Upper Receiver are multi-cal and are interchangeable with other upper and lower receivers that host a caliber encompassed under the AR-15 platform. (This AM-15 Upper Receiver DOES NOT have the big bore cut, so calibers such as .450 Bushmaster, .458 SOCOM and .50 Beowulf are not compatible.)

Features an RF-85 treated, 16'' 5.56, M4 contoured barrel with 1:8 twist - the treatment helps mitigate the wear allotting expanded lifetime for your barrel, this is a carbine length gas system. The .750 T6 aluminum gas block is equipped with a top rail at height with the upper receiver making it front-sight capable.

Six-position adjustable buttstock mated with a carbine buffer system. Pistol grip, flash suppressor and handguards are A2 style, the handguards have aluminum heat shields inserted.

All Anderson Manufacturing's parts are held to Military Specifications and tolerances and are checked by our Quality Engineers throughout the entire manufacturing process to ensure that these standards are upheld.

This rifle is ready to accept and is fully compatible with any optic manufactured for the AR-15 platform.

Model No. B2-K850-A000-R

UPC 784672476942

A layaway plan is also available. Please email us at [email protected] for details

OUT OF STOCK -- EMAIL [email protected] FOR DETAILS ON OUR WAIT LIST

Armalite AR-50A1 Rifle .50BMG 50 BMG with Bipod -- 50A1BGGG

30” Chrome Moly barrel with 1:15 twist

MASSIVE FLUTED MUZZLE BREAK

OCTAGONAL RECEIVER

V-SHAPED STOCK

3-section stock-Extruded forend, machined grip w/ vertical grip, forward & machined removable

Finish: Hard anodized aluminum, manganese phosphated steel

-Includes 15 minute sight base (slotted for MIL-STD 1913 scope rail) & ear plugs

Limited lifetime factory warranty

Item No: 50A1BGGG

UPC 651984021095

A layaway plan is also available. Please email us at [email protected] for details

OUT OF STOCK -- EMAIL FOR DETAILS ON HOW TO ORDER ONE

ATI Omni Hybrid AR-15 .410 Semi-Auto Shotgun ATIGOMNI41LTD

Built on their patented Omni Hybrid receiver, the Omni Hybrid 410 is a one of a kind shotgun wonder. Chambered for 2 1/2" .410ga shells, the Omni Hybri 410 is a must have multi-purpose shotgun.

Featuring an 18.5" barrel with a custom 13" keymod rail, the Omni Hybrid 410 runs on a gas operated, short stroke balanced piston system.

Each Omni Hybrid 410 comes with one 5 round American Tactical made polymer magazine. Additional 5 round magazines and 15 round magazines are usually available for separate purchase. The Omni Hybrid 410 will only operate with the patent pending American Tactical polymer 410 magazine.

Every Omni Hybrid 410 is built on their patented Omni Hybrid lower receiver and can be converted to 5.56 or 300blk just by changing the upper receiver! Every Omni Hybrid 410 upper receiver is built to regular AR spec and can be installed on most mil-spec lower receivers!

Weight: 6.5lbs
BBL: 18.5"
Stock: M4
Rail: 13'' custom keymod
Mag: 5 round capacity

Assembled in Summerville, SC by American Tactical!

IMPORTANT:
The Omni Hybrid 410 shoutgun only works with 2 1/2" shotgun shells. Some manufacturers 2 1/2" shells are actually longer than 2 1/2" and may not operate in this gun. Please check the length of your 2 1/2" shells prior to attempting to fire them. The Omni Hybrid 410 shotgun only fires 410 ga cartridges. Do not attempt to fire other calibers of ammunition through this firearm. Other cartridges such as 45LC or 45-70 will not operate with this firearm and may cause damage to the shotgun and harm to the operator if attempted.

UPC 813393019951

A lay away plan is also available. Please email us at [email protected] for details

SOLD PENDING FUNDS. PLEASE EMAIL IF YOU'D LIKE TO ORDER ONE

New Barrett REC7 DI Gen II 5.56 AR-15 rifle chambered in 5.56 mm.

According to Bergara: The B-14 Wilderness Terrain rifle features our hand-painted camouflage Terrain molded stock with mini-chassis. It also supports a fully free-floated barrel finished in Sniper Grey Cerakote and features a seamless, omnidirectional, and multi-ported muzzle brake.

All B-14 Wilderness rifles are factory guaranteed to produce groups of 1.0 MOA or less at 100 yards with quality factory match grade ammunition.

Fully free floated 24” Barrel (No. 6 taper) with 1:8 twist; drilled / tapped

Threaded Barrel 5/8 x 24

Gray Cerakote finish

Adjustable Bergara Performance trigger

OMNI Muzzlebrake (screws on)

Synthetic Molded Mini-Chassis Stock with adjustable cheek piece and length of pull

5 + 1 Magazine Capacity -- AICS style detachable magazine

Two position thumb safety

9.25 lbs

Per Bergara:

Bridging the gap between the B-14 and Premier Series, we bring you the B-14 Wilderness Series. This series tackles the need for rifles that can withstand the rugged and unforgiving wilderness while blending into those very same elements – hence Bergara’s hand-painted camouflage stocks with added webbing for increased texture and grip. All Wilderness Series barreled actions feature Sniper Grey Cerakote® finishes for advanced protection in extremely harsh weather.

Featuring a Terrain molded stock with mini-chassis, this rifle is also outfitted with a Bergara Performance Trigger and a 3 round AICS style detachable magazine. The world-renowned (#5.5) Bergara barrel is finished in Sniper Grey Cerakote and features a seamless, omnidirectional, and multi-ported muzzle brake that will reduce felt recoil by up to 35 percent.

The Terrain is complemented by our super-smooth B-14 Action, which is a two-lug system with a sliding plate extractor and a coned bolt nose and breech to ensure smooth feeding and extraction of the cartridge. It has been factory drilled and tapped to fit Remington 700 style rings and bases and includes QD flush cups in the stock to allow for easy attachment and detachment of slings.

The B-14 Wilderness Series provides a great deal of added value for the hunter that wants a no-nonsense performer that is built to withstand the backcountry. We are breaking through the uninhabited and inhospitable regions to bring you the weather protection needed to withstand these conditions.

We believe the word wilderness, while may be rugged, harsh and unforgiving, describes an experience rather than a location. We built the B-14 Wilderness Series to match every stride taken off the beaten trail.

Manufacturer #B14S652

UPC 043125015221

A layaway plan is also available. Please email us at [email protected] for details

According to Bergara: The B-14 Wilderness Terrain rifle features our hand-painted camouflage Terrain molded stock with mini-chassis. It also supports a fully free-floated barrel finished in Sniper Grey Cerakote and features a seamless, omnidirectional, and multi-ported muzzle brake.

Fluted bolt

All B-14 Wilderness rifles are factory guaranteed to produce groups of 1.0 MOA or less at 100 yards with quality factory match grade ammunition.

Fully free floated 24” Barrel (No. 6 taper) with 1:8 twist; drilled / tapped

Threaded Barrel 5/8 x 24

Gray Cerakote finish

Adjustable Bergara Performance trigger

OMNI Muzzlebrake (screws on)

Synthetic Molded Mini-Chassis Stock with adjustable cheek piece and length of pull

3 + 1 Magazine Capacity -- AICS style detachable magazine

Two position thumb safety

9.3 lbs

Per Bergara:

Bridging the gap between the B-14 and Premier Series, we bring you the B-14 Wilderness Series. This series tackles the need for rifles that can withstand the rugged and unforgiving wilderness while blending into those very same elements – hence Bergara’s hand-painted camouflage stocks with added webbing for increased texture and grip. All Wilderness Series barreled actions feature Sniper Grey Cerakote® finishes for advanced protection in extremely harsh weather.

Featuring a Terrain molded stock with mini-chassis, this rifle is also outfitted with a Bergara Performance Trigger and a 3 round AICS style detachable magazine. The world-renowned (#5.5) Bergara barrel is finished in Sniper Grey Cerakote and features a seamless, omnidirectional, and multi-ported muzzle brake that will reduce felt recoil by up to 35 percent.

The Terrain is complemented by our super-smooth B-14 Action, which is a two-lug system with a sliding plate extractor and a coned bolt nose and breech to ensure smooth feeding and extraction of the cartridge. It has been factory drilled and tapped to fit Remington 700 style rings and bases and includes QD flush cups in the stock to allow for easy attachment and detachment of slings.

The B-14 Wilderness Series provides a great deal of added value for the hunter that wants a no-nonsense performer that is built to withstand the backcountry. We are breaking through the uninhabited and inhospitable regions to bring you the weather protection needed to withstand these conditions.

We believe the word wilderness, while may be rugged, harsh and unforgiving, describes an experience rather than a location. We built the B-14 Wilderness Series to match every stride taken off the beaten trail.

Manufacturer #B14SM659

UPC 0431125015191

A layaway plan is also available. Please email us at [email protected] for details

According to Bergara: Although there are many rifles on the market today, we wanted to focus on one thing: quality. Our B-14 rifles were inspired by the desire to bring the quality that Bergara was known for in the custom rifle world to production rifles made for all hunters. In the B-14 rifle, you will find a level of craftsmanship that surpasses all of the other production hunting rifles on the market.

The B-14 Ridge rifle features a molded synthetic stock made of glass fiber reinforced polymer. As with the entire B-14 Series, the Ridge brings Bergara Barrel accuracy to a line of hunting rifles that is affordable to serious big-game hunters. Built in Spain at our highly automated and efficient barrel factory, this rifle delivers a level of quality and performance that is unmatched in its price range.

The world-renowned Bergara barrel on this rifle for hunting whatever your heart desires is complemented by our own super-smooth B-14 Action, which is a two-lug system with a sliding plate extractor and a coned bolt nose and breech to ensure a smooth feeding and extraction of the cartridge. It’s also outfitted with a Bergara curved trigger we designed to guarantee a crisp, clean pull every time you fire the rifle. It has been factory drilled and tapped to fit Remington 700 style rings and bases.

The Bergara Ridge comes with a #5 4140 CrMo steel barrel finished in matte blue. Our stocks are bedded with integral pillars for stability and enhanced accuracy. The barrel is threaded 5/8×24 to accept muzzle brakes or suppressors.

During the molding process, solid epoxy pillars are permanently molded into place, providing a secure and stable bedding surface for the barreled action. The base color is dark gray with white and black flecks. A SoftTouch coating gives the stock soft, tacky feel that is easy to grip even in harsh weather.

All B-14 Wilderness rifles are factory guaranteed to produce groups of 1.0 MOA or less at 100 yards with quality factory match grade ammunition.

Fully free floated 22” Barrel (No. 5 taper)

• Weight: 7.5 lbs.
• Overall Length: 41.5”
• Barrel Length: 22”
• Barrel Taper: No. 5
• Muzzle: Threaded 5/8-24″ with thread protector
• Finish: Matte Blued
• Magazine: Hinged floor plate
• Magazine Capacity: 4 standard
• Stock: American-style synthetic with SoftTouch finish
• Scope Mount: Fits Remington 700 bases with 6-48 screws
• Bottom Metal: Standard with Floor plate. Convertible to detachable magazine *not compatible with AICS Bottom Metal
• CALIBER/TWIST: 6.5 CREEDMOOR/1:8

Manufacturer #B14S502

UPC 043125014590

A layaway plan is also available. Please email us at [email protected] for details